Gilles Tooling_改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

ZX-6R(23-24)Gilles Tooling clutch side handshield

Product Code：KHP2-01-BD

Description 簡介：DESCRIPTION The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HKD1270

ZX-6R(23-24)Gilles Tooling axle nut ACM titan M24X1,5

Product Code：ACM-24-15

Description 簡介：DESCRIPTION made of titanium ti6alv4; a 20 gram (less than one ounce) lightweight axle nut in a shapely design, innovative pin-lock secure high locking characteristics; multifunctional application: safety for different bolted joints such as rear axles, pivot shafts, yokes etc.; no TÜV certificate required, plastic-pin of the pin-lock accommodate thread form and locks with friction, simple assembly with a regular hexagon nut.

Price：HKD890

ZX-6R(23-24)Gilles Tooling AXB chain adjuster red

Product Code：AXB-ZXJBF.r

Description 簡介：DESCRIPTION The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HKD1100

ZX-6R(23-24)Gilles Tooling handlebar GP-LIGHT 2 500 black

Product Code：GPL2-500.b

Description 簡介：DESCRIPTION Features: diameter 50mm (1-31/32 inch) black anodized Very lightweight construction (ca. 670 gram) Engraved markings for easy justification to the fork Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Length of the tube is 255,5mm Fixed angle of 6 degree is the perfect compromise for sportive and street use

Price：HKD1980

ZX-6R(23-24)Gilles Tooling fuel cap

Product Code：FCAP-04-B

Description 簡介：DESCRIPTION The new GILLES fuel filler cap is an outstanding example of precise craftsmanship. The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company. Developed through experiences fro

Price：HKD1170

YZF-R6(17-20)Gilles Tooling rearset

Product Code：FXR-Y07-B

Description 簡介：DESCRIPTION Produktdetails: Reduziert auf maximale Performance. Know-how aus der World Superbike, zahlreiche gewonnene WM Titel belegen dies. Puristische Sportlichkeit in ästhetischem Design. Perfekte Balance aus Leichtbau und Verwindungssteifigkeit. Einzigartig durch geschütztes GILLES.TOOLING Design. Doppelt kugelgelagerte Schalt- und Bremshebel. 3-fach einstellbare starre Racingraste.

Price：HKD4250

YZF-R6(17-20)Gilles Tooling mounting kit reverse shifting

Product Code：RK-RJ27.b

Description 簡介：DESCRIPTION This mounting kit reverse shifting (only for use with the rearset FXR-Y07) allows to use GP/reversed shifting for this rearset.

Price：HKD590

YZF-R6(17-20)Gilles Tooling brake lever type FXL

Product Code：FXBL-25.b

Description 簡介：DESCRIPTION Product details: optimal shape for all grip styles unique by proprietary GILLES design ideal lever length for perfect control phosphate precise bearing TÜV approved up to 35 times adjustable high accurate grip length adjusting comfortable adjusting by central hand wheel rated brake joint beyond two finger braking zone

Price：HKD1430

YZF-R6(17-20)Gilles Tooling clutch lever type FXL

Product Code：FXCL-31.b

Description 簡介：DESCRIPTION Product details: optimal shape for all grip styles unique by proprietary GILLES design ideal lever length for perfect control phosphate precise bearing TÜV approved up to 35 times adjustable high accurate grip length adjusting comfortable adjusting by central hand wheel rated brake joint beyond two finger braking zone

Price：HKD1100

YZF-R6(17-20)Gilles Tooling brake lever guard carbon

Product Code：BHP2-CAR-01

Description 簡介：DESCRIPTION We know how important it is to have confidence in the equipment you use on the racetrack or on the street. That is why we have designed our lever protectors in such a way that they also meet the highest requirements and are always reliable even under the toughest circumstances. Mandatory for racing, our lever protector is one of our developments to the racing and performance driven product line-up. Off the racetrack you will also experience it as a safety plus. The well-known

Price：HKD2800

YZF-R6(17-20)Gilles Tooling clutch lever guard carbon

Product Code：KHP2-CAR-01

Description 簡介：DESCRIPTION We know how important it is to have confidence in the equipment you use on the racetrack or on the street. That is why we have designed our lever protectors in such a way that they also meet the highest requirements and are always reliable even under the toughest circumstances Mandatory for racing, our lever protector is one of our developments to the racing and performance driven product line-up. Off the racetrack you will also experience it as a safety plus. The well-known a

Price：HKD2800

YZF-R6(17-20)Gilles Tooling handshield brake side black

Product Code：BHP2-01-BD

Description 簡介：DESCRIPTION The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HKD1270

YZF-R6(17-20)Gilles Tooling handshield clutch side black

Product Code：KHP2-01-BD

Description 簡介：DESCRIPTION The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HKD1270

YZF-R6(17-20)Gilles Tooling AXB chain adjuster

Product Code：AXB-RJ27.b

Description 簡介：DESCRIPTION The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HKD1100

YZF-R6(17-20)Gilles Tooling fuel cap

Product Code：FCAP-03-B

Description 簡介：DESCRIPTION Our motor protectors are the perfect combination of design and protection. Therefore a very precise adaptation to the housing cover of every motorcycle happens. This is achieved by a mounting plate made of anodized aluminum combined with the slider on top made of extremely durable POM. Due to the included screws, the installation is very simple.

Price：HKD1170

YZF-R6(17-20)Gilles Tooling Race Cover Kit black

Product Code：RCK-04.b

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. Alos this racing covers for the mounting points of pillion foot pegs, mirrors or license plate bracket. The utility is always an important detail: racing covers protect open mounting points against dirt and moisture. This kit contains the following components for the YZF-R6 (year 2017, type RJ27): 2x mirror cover, 2x cover for holders of the passenger pegs and 1x cover for the license plate holder. Thus, after disas

Price：HKD1210