Gilles Tooling_改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

CBR1000RR-R(20-23)Gilles Tooling mounting kit gpl2-race

Product Code：GPL2-ABK-H01

Description 簡介：DESCRIPTION This mounting kit is necessary so that the GPL2-500-Race can be used at a Honda CBR 1000 RR/R Fireblade (Type SC82).

Price：HKD220

CBR1000RR-R(20-23)Gilles Tooling handlebar GP-LIGHT 4 500

Product Code：GPL4-500-B

Description 簡介：DESCRIPTION KEY FACTS - Lightweight Construction - Replaceable Steering Tubes - Plug-and-Play - Steering Tubes with Breakaway Point - Compatibility = Compatible with BHP2 and LG - Extra Feature = Clamp with Groove - Fork Diameter = 50mm - Material = High-Strength Aluminum - Weight = 600g (Set) - Homologation = Part Approval Certificate - Spare Parts Supply = We offer spare parts supply for this product LIGHTWEIGHT CONSTRUCTION Our GPL4 clip-on handlebar is designed with a special

Price：HKD2750

CBR1000RR-R(20-23)Gilles Tooling handlebar GP-LIGHT2 500Race

Product Code：GPL2-500-RACE

Description 簡介：DESCRIPTION Black anodized Very lightweight construction Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Fixed angle of 6 degree is the perfect compromise for sportive and street use For Honda CBR 1000RR/R Fireblade (Type SC82) the additional mounting kit GPL2-ABK-H01 is needed.

Price：HKD2310

CBR1000RR-R(20-23)Gilles Tooling quick change system

Product Code：AXB-SC82-GNL

Description 簡介：AXB chain adjuster and quick change system DESCRIPTION This product combines the advantages of our AXB chain adjuster with a quick change system for the rear wheel. During changing the wheel the rear brake caliper and the wheel bushing stay in place and a guide rail at the inside allows easy moving of the wheel.

Price：HKD3080

CBR1000RR-R(20-23)Gilles Tooling AXB chain adjuster black

Product Code：AXB-SC77.b

Description 簡介：DESCRIPTION The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HKD1100

CBR1000RR-R(20-23)Gilles Tooling AXB chain adjuster red

Product Code：AXB-SC77.r

Description 簡介：DESCRIPTION The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HKD1100

CBR1000RR-R(20-23)Gilles Tooling fuel cap

Product Code：FCAP-02-B

Description 簡介：DESCRIPTION The new GILLES fuel filler cap is an outstanding example of precise craftsmanship. The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company. Developed through experiences fro

Price：HKD1170

CBR1000RR-R(20-23)Gilles Tooling passenger footpegs cover

Product Code：PPC-10-KIT-B

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. Alos this racing covers for the mounting points of pillion foot pegs, mirrors or license plate bracket. The utility is always an important detail: racing covers protect open mounting points against dirt and moisture. This kit contains the following components: 2x cover for holders of the passenger pegs. Thus, after disassembling the original passenger pegs, the corresponding open mounting points can be concealed cle

Price：HKD770

CBR1000RR-R(20-23)Gilles Tooling race cover kit

Product Code：RCK-10-B

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. Also this racing covers for the mounting points of pillion foot pegs and licence plate holder. The utility is always an important detail: racing covers protect open mounting points against dirt and moisture.

Price：HKD1430

CBR1000RR-R(20-23)Gilles Tooling rear stand hook Kit

Product Code：RSH-03-GNL

Description 簡介：DESCRIPTION Lift the bike in MotoGP Style. These stand hoods are mounted at the swing arm thread to allow quick and secure mounting. The hooks are made of anodized aluminum.

Price：HKD1100

CBR1000RR-R(20-23)Gilles Tooling shiftholder kit titanium

Product Code：SHIHO-SC59-KIT.t

Description 簡介：DESCRIPTION The gear shaft stands too far out of the gear box, it bends elastically when shifting hard or quick which is the reason for imprecise gear shifting Our Shiftholder helps to eliminate gear shift problems, it stabilizes the gear shaft and eliminates vague shifting. A brass-bushing is used, it comes in hard anodized titanium color.

Price：HKD950

CBR1000RR-R(20-23)Gilles Tooling triple tree set

Product Code：FO-SC82-0-02-SET-B

Description 簡介：DESCRIPTION Our milled motorcycle triple clamps combine the immense know-how from the motorcycle racing elite with top-notch quality and offer an impressive list of outstanding features. Each component is made from high-quality aluminum to ensure maximum performance and stability. One outstanding feature of our triple clamps is their minimal weight. By using high-quality aluminum, a lightweight construction is made possible, reducing the overall weight of the motorcycle. This results in sign

Price：HKD16350

ZX-6R(23-24)Gilles Tooling brake lever type FXL

Product Code：FXBL-04.b

Description 簡介：DESCRIPTION Product details: optimal shape for all grip styles unique by proprietary GILLES design ideal lever length for perfect control phosphate precise bearing TÜV approved up to 35 times adjustable high accurate grip length adjusting comfortable adjusting by central hand wheel rated brake joint beyond two finger braking zone

Price：HKD1100

ZX-6R(23-24)Gilles Tooling clutch lever type FXL

Product Code：FXCL-27.b

Description 簡介：DESCRIPTION Product details: optimal shape for all grip styles unique by proprietary GILLES design ideal lever length for perfect control phosphate precise bearing TÜV approved up to 35 times adjustable high accurate grip length adjusting comfortable adjusting by central hand wheel rated brake joint beyond two finger braking zone

Price：HKD1100

ZX-6R(23-24)Gilles Tooling brake lever guard carbon

Product Code：BHP2-CAR-01

Description 簡介：DESCRIPTION We know how important it is to have confidence in the equipment you use on the racetrack or on the street. That is why we have designed our lever protectors in such a way that they also meet the highest requirements and are always reliable even under the toughest circumstances. Mandatory for racing, our lever protector is one of our developments to the racing and performance driven product line-up. Off the racetrack you will also experience it as a safety plus. The well-known

Price：HKD2800

ZX-6R(23-24)Gilles Tooling brake side handshield

Product Code：BHP2-01-BD

Description 簡介：DESCRIPTION The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HKD1270