MT-07(2025)Puig footpegs Racing

The Puig racing footpegs are specially designed for R motorcycles and offer maximum grip to the rider and passenger. Its attractive sport design makes it the perfect complement for the most radical motorcycles, whose aesthetics receive an even more extreme touch.

They measure 72 mm long and 27 mm wide and their weight is only 90 gr. Ergonomics is a key factor in its design, which has been designed to increase its free height to the ground, allowing increased the angle of inclination of the motorcycle. They are adjustable in inclination and have marks that ensure greater precision in its assembly.

 

The racing footpegs provide riders great confidence in their riding, both in quiet riding and specially in the moments when the rider tries to find the limits on trackdays or races, when you need to have maximum sensitivity in all the components of the motorcycle.

They are produced in blue, black, gold, silver, red, orange and green, so that each biker can find them with the best match. For the assembly, parts of the original footpegs are used and for each motorcycle the rider and passenger fitting adapter must be purchased separately.

 

Puig racing footpegs have the TÜV certification and the ABE document.

 

Footpegs by pair RACING MODEL

6310A     Blue

6310N     Black

6310O     Gold

6310R     Red

6310P     Silver

6310V     Green

6310T     Orange

6310L     Purple

6310Y     Titanium

HKD 360

 

Adapters for YAMAHA MT-07 2025

Head by pair pilot

Required to mount the footpegs

20673N

HKD 350

 

ADJUSTABLE adapter kit for rider

Needed to install footpegs.

 

Requires 20mm adjustable relocation kit to mount this item. You could not mount 40mm adjustable recolation kit.

20675N

HKD 330

 

20mm adjustable footpegs relocation adaptors kit

20mm relocation brackets. This offset along with the adjustable footpeg adaptor allows you to move the footpeg relative to the original position in a 20mm radius and at 15 degrees intervals.

3838N

HKD 370

 

ADJUSTABLE adapter kit for passenger

Needed to install footpegs.

Can only mount them on footpegs such as Racing, Sport, R-Fighter, R-Fighter S, Vintage and Heritage.

 

It is required to use relocation sets of 20 or 40mm with these supports.

20839N

HKD 330

 

40mm adjustable footpegs relocation adaptors kit

40mm relocation brackets. This offset along with the adjustable footpeg adaptor allows you to move the footpeg relative to the original position in a 40mm radius and at 15 degrees intervals.

3839N

HKD 390