MT-0792025)Puig footpegs Vintage

The Vintage Footpegs by Puig have been designed to adapt naturally to retro-style motorcycles, both for the stock series and for the most personal preparations.

 

These footrests are manufactured starting from an aluminum block, on which an anodized finish is made and a rubber support is mounted to improve the grip of the boot and the isolation of vibrations.

 

In spite of its classic shapes, ergonomics have been taken into account in its design, with the inclined outer end to increase the ground clearance. His dimensions, 72 mm x 27 mm, allow a correct support of the foot and some marks have been recorded in the body to ensure the precision in its assembly, which allows the regulation in inclination.

 

The Vintage footrests are available in black and silver, weigh 90 grams and are ABE approved and TÜV certifie

 

9189N    Black

9189P    Silver

HKD 430

 

Adapters for YAMAHA MT-07 2025

Head by pair pilot

Required to mount the footpegs

20673N

HKD 350

 

ADJUSTABLE adapter kit for rider

Needed to install footpegs.

 

Requires 20mm adjustable relocation kit to mount this item. You could not mount 40mm adjustable recolation kit.

20675N

HKD 330

 

20mm adjustable footpegs relocation adaptors kit

20mm relocation brackets. This offset along with the adjustable footpeg adaptor allows you to move the footpeg relative to the original position in a 20mm radius and at 15 degrees intervals.

3838N

HKD 370

 

ADJUSTABLE adapter kit for passenger

Needed to install footpegs.

Can only mount them on footpegs such as Racing, Sport, R-Fighter, R-Fighter S, Vintage and Heritage.

 

It is required to use relocation sets of 20 or 40mm with these supports.

20839N

HKD 330

 

40mm adjustable footpegs relocation adaptors kit

40mm relocation brackets. This offset along with the adjustable footpeg adaptor allows you to move the footpeg relative to the original position in a 40mm radius and at 15 degrees intervals.

3839N

HKD 390