Z650RS(21-25)Puig brake lever protector Raw

The brake lever protector arises from the need to prevent accidental contact with other riders, avoiding brake engagement and consequent falls.

 

In the design of the new Raw protector, Puig has prioritized track use by minimizing components and adjustments. It features a central body of anodized aluminum and an end part made of practically unbreakable polyamide in case of a fall.

 

A universal version is offered, which can be mounted on handlebars with an inner diameter of 13 to 18 mm without the need for any adapter. However, specific adapters are also available for motorcycles that require them. Additionally, the option to purchase the clutch side counterweight is offered to unify the bike's components.

 

The Raw brake lever protectors are compatible with our Puig levers. We cannot guarantee compatibility with all original levers.

 

Brake / Front Brake Lever Protector

Includes bar end weight

13-18 mm Diameter

 

In motorcycle models that do not require a specific adaptor, it is necessary to remove the internal fixing mechanism of the original bar end weight. Not compatible with Bar Ends and Bar Ends mirrors. Not compatible with Original lever

 

21993N     Black

21993A     Blue

21993R     Red

21993P     Silver

21993V     Green

21993O     Gold

21993T     Orange

21993L     Purple

 

Adapters for KAWASAKI Z650RS 2025

Adaptor lever protector + bar end left side

Same reference for the adaptor lever guard and the bar end weight on the left side. Therefore, to mount the lever guard you must ask for 1 unit of this reference and if you also want the bar end weight on the right side of your motorcycle’s handlebar, it will be the same as the one on the left side. So then you must ask for 2 references in total.

9584N

HKD 160