NC750X(20-24)SW-Motech BBSTORM handguard 2-point attachment

Product Code：HPR.00.220.10200/B

Description 簡介：BBSTORM Handguard kit Mounted on the handlebar internal thread and the bar end, the aluminum backbone is sturdy enough for your most demanding rides. The large BBSTORM handguard shells made of impact-resistant plastic have been specially developed for all-weather use and offer the best protection against cold and wind. In the event of a fall, damaged shells can be easily replaced. The BBSTORM handguards can be screwed onto the aluminum handlebars in just a few easy steps. Bike-specific mo

Price：HKD1600

NC750S(14-15)SW-Motech centerstand

Product Code：HPS.01.147.10002/B

Description 簡介：Centerstand The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires. Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mou

Price：HKD2200

NC750S(16-24)SW-Motech EVO fog light set Universal

Product Code：NSW.00.004.51000/B

Description 簡介：EVO Fog light kit Universal This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied

Price：HKD3600

Discount：HKD3250

NC750S(16-24)SW-Motech KOBRA Handguard 2 point mounting

Product Code：HPR.00.220.20200/B

Description 簡介：KOBRA Handguard kit Mounted on the handlebar internal thread and the bar end, the aluminum backbone is sturdy enough for your most demanding rides. The sturdy aluminum handlebars on the KOBRA handguards protect handlebars and drivers alike in the event of accidents and falls, while the replaceable polypropylene impact-resistant handguard shells provide additional protection against weather, flying rocks and off-road driving. Even more protection and safety! The protective surface of the KOBR

Price：HKD1600

NC750S(16-24)SW-Motech Barkbuster handguard Kit STORM S1

Product Code：STM-001-00-BK

Description 簡介：Barkbusters STORM handguard kits STORM handguards are suitable for street machines, adventure bikes, naked bikes and scooters. The one-point mounting system allows a great deal of protection and simple mounting. The handguard kit includes the plastic shells, matching aluminum frames and the mounting material. STORM handguards offer an especially large protective surface and thus good protection against weather elements. Fits 22 mm handlebars One-point mount Particularly large protective su

Price：HKD1100

CB1000R(18-20)SW-Motech EVO fog light kit

Product Code：NSW.00.004.51000/B

Description 簡介：EVO Fog light kit Universal This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied

Price：HKD3600

Discount：HKD3250

CMX500 Rebel(16-24)Puig original turn light support

Product Code：9327N

Description 簡介：SUPPORT FOR ORIGINAL TURN LIGHT FOR MOTORCYCLE HONDA CMX 500 REBEL 2024 Cover the space under the original rear turn signal with the PUIG turn signal holder. With this support, you can improve the image of your motorcycle and mount the Puig license plate without having to modify the original indicator of the motorcycle. This piece is made of steel and finished in EPOXI paint in black color. SUPPORT FOR ORIGINAL TURN LIGHT Check the measurements of the holes once the turn signal has been re

Price：HKD140

Z800(12-16) SW-Motech slider set for frame

Product Code：STP.08.286.10000/B

Description 簡介：SW-MOTECH Frame Slider Kit Maximum protection of important motorcycle parts Elegant slider pads are made with light-weight, CNC-milled PA6-MO which offers higher tensile strength and more impact and UV resistance than Delrin Slider kits are made of abrasion resistant plastic (Nylon) Easy and user-friendly installation Included: 2 frame sliders Mounting material Mounting instructions

Price：HKD1200

Z800(12-16)SW-Motech KOBRA handguard 1 point mounting

Product Code：HPR.00.220.25000/B

Description 簡介：KOBRA Handguard-Kit Black. For 22 mm handlebars. 1-point attachment. Conspicous design Made of impact-resistant moplen plastic in black Protects from stone-chipping and weather protection Universal fitting for 22 mm handlebars Included: 2 KOBRA Handguards Mounting material Mounting instructions Optional available: KOBRA Extension allows almost 50 % more protection Article HPR.00.220.30100/B KOBRA LED blinkers (1 watt, overall 32 LEDs) Article HPR.00.220.30000/B Resistor-Set for 1

Price：HKD1200

Z800(12-16) SW-Motech LED indicator set for KOBRA handguards

Product Code：HPR.00.220.30000/B

Description 簡介：KOBRA LED indicators LED indicators for application with KOBRA handguards The indicators are equipped with 16 LED´s per side and have an e-quality mark. Simple to mount in KOBRA handguards. ECE test mark: E8 50R-001279 Included: 2 LED indicators Mounting instructions Specifics: Operating current of the LED indicators is 12 volt, consumption 1 watt per side For the correct frequency of the indicators (according to the original indicators) there might be a resistor neccessary. To u

Price：HKD500

ZX-636(18-23) SW-Motech slider set for front axle

Product Code：STP.08.176.10301/B

Description 簡介：Slider sets for front axle The front axle crash pads made of abrasion-resistant plastic protect the drive shaft from damage in the event of a fall. The smooth surface also provides excellent sliding properties. The polished bull logo in red adds a visual highlight to your motorcycle. Protection for the fork Discreet slider pad made from abrasion-resistant polyamide Robust core made of fiberglass-reinforced plastic (PA6 GF30) High mechanical damping capacity due to TPE coating Good slidin

Price：HKD550

Tracer 9 GT(20-23) SW-Motech EVO fog light set Universal

Product Code：NSW.00.004.51000/B

Description 簡介：EVO Fog light kit Universal This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied

Price：HKD3600

NC700X(12-13)SW-Motech centerstand

Product Code：HPS.01.137.10001/B

Description 簡介：Centerstand The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires. Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mou

Price：HKD2200

NC700X(12-13)SW-Motech EVO footrest kit

Product Code：FRS.01.112.10303

Description 簡介：EVO footrest kit for Honda NC, Crossrunner, Crosstourer and Suzuki SV650, DL650 The new EVO footrest enhances stability, comfort and traction under a variety of conditions. Pivotable, teethed elements offer 36 possible settings. Individual adjustment for height, position and angle guarantee best ergonomics possible. Easy installation to original mounting points 36 position settings (front, back, down, angle) Strong connection due to teethed and bolted elements Marks facilitate symmetric a

Price：HKD1450

NC700X(12-13)SW-Motech ION footrest kit

Product Code：FRS.01.011.10303/S

Description 簡介：SW-MOTECH ION footrest Kit For mounting on the footrest holder Made from corrosion resistant cast stainless steel with removable rubber pad Big dimensioned contact area Save against slipping because of profiled surface Footrest link CNC-milled, made of extremely firm aluminum alloy Adjustable in two different positions (original position and 15 mm lower) Made for offroad and touring Included: 2 ION footrests with link Mounting material Mounting instructions

Price：HKD1150

NC700X(12-13)SW-Motech EVO fog light kit

Product Code：NSW.00.004.51000/B

Description 簡介：EVO fog light kit This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters. The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied on

Price：HKD3600