NC750S(16-24)SW-Motech KOBRA Handguard 2 point mounting

Product Code：HPR.00.220.20200/B

Description 簡介：KOBRA Handguard kit Mounted on the handlebar internal thread and the bar end, the aluminum backbone is sturdy enough for your most demanding rides. The sturdy aluminum handlebars on the KOBRA handguards protect handlebars and drivers alike in the event of accidents and falls, while the replaceable polypropylene impact-resistant handguard shells provide additional protection against weather, flying rocks and off-road driving. Even more protection and safety! The protective surface of the KOBR

Price：HKD1600

NC750S(16-24)SW-Motech LED indicator set KOBRA handguards

Product Code：HPR.00.220.30000/B

Description 簡介：LED indicator set for KOBRA handguards LED blinkers, available separately, offer increased visibility in traffic and can be easily placed in the recesses of the handguards. A resistor set is required for retrofitting the blinkers with 10 or 20 watts to KOBRA LED blinkers with 1 watt. ECE test mark: E8 50R-001279 The LED indicators have an operating current of 12 volts and consume 1 watt per side The original indicators must be removed in order to be able to use the LED indicators Dependin

Price：HKD500

NC750S(16-24) SW-Motech Resistor set for LED indicators

Product Code：HPR.00.220.30700/B

Description 簡介：Resistor set for 1 watt LED indicators LED blinkers, available separately, offer increased visibility in traffic and can be easily placed in the recesses of the handguards. A resistor set is required for retrofitting the blinkers with 10 or 20 watts to KOBRA LED blinkers with 1 watt. For converting indicators with 10 and 20 watts to LED indicators for KOBRA handguards with only 1 watt Also suitable for other LED indicators with 1 watt Included in delivery 2 x Resistors (15 ohms/20 watts)

Price：HKD150

NC750S(16-24)SW-Motech BBSTORM handguard 2 point mounting

Product Code：HPR.00.220.10200/B

Description 簡介：BBSTORM Handguard kit Mounted on the handlebar internal thread and the bar end, the aluminum backbone is sturdy enough for your most demanding rides. The large BBSTORM handguard shells made of impact-resistant plastic have been specially developed for all-weather use and offer the best protection against cold and wind. In the event of a fall, damaged shells can be easily replaced. The BBSTORM handguards can be screwed onto the aluminum handlebars in just a few easy steps. Bike-specific mo

Price：HKD1600

NC750S(16-24)SW-Motech Handguard kit BBZ

Product Code：BBZ-001-01-BK

Description 簡介：Handguards kit BBZ Designed for strong and stormy wind conditions Maximum protection Made of flexible cloth fabric Suitable for almost all motorcycles Construction remains self-supporting in strong wind No fluttering in the wind Operation of the motorcycle is not affected Bends flexibly around the windscreen and fairing at full steering lock Mounting options: on the handlebar with handlebar end weights, for hollow handlebars or on existing aluminium backbones Included in delivery 2 x

Price：HKD1000

NC750S(16-24)SW-Motech Barkbuster handguard Kit STORM S1

Product Code：STM-001-00-BK

Description 簡介：Barkbusters STORM handguard kits STORM handguards are suitable for street machines, adventure bikes, naked bikes and scooters. The one-point mounting system allows a great deal of protection and simple mounting. The handguard kit includes the plastic shells, matching aluminum frames and the mounting material. STORM handguards offer an especially large protective surface and thus good protection against weather elements. Fits 22 mm handlebars One-point mount Particularly large protective su

Price：HKD1100

NC750S(16-24)Braking wave disc Front-R

Product Code：WF7106

Description 簡介：TYPE ONROAD DISK SERIES W-FIX DESCRIPTION Traditional WAVE® fix disk for both front and rear applications. Replacement of original OEM disk. PART NUMBER WF71XX front disk - WF75XX rear disk - TECHNICAL FEATURES AND BENEFITS more braking grip > highly reactive less weight > better handling high heat dissipation > stable power in all conditions HOW DOES IT WORK? Outer and inner diameter of the disk have a non-round design that enables better radial expansion of the rotor under extreme h

Price：HKD1640

NC750S(16-24)Braking brake disc wave fixed Rear-R

Product Code：WF7524

Description 簡介：TYPE ONROAD DISK SERIES W-FIX DESCRIPTION Traditional WAVE® fix disk for both front and rear applications. Replacement of original OEM disk. PART NUMBER WF71XX front disk - WF75XX rear disk - TECHNICAL FEATURES AND BENEFITS more braking grip > highly reactive less weight > better handling high heat dissipation > stable power in all conditions HOW DOES IT WORK? Outer and inner diameter of the disk have a non-round design that enables better radial expansion of the rotor under extreme h

Price：HKD1400

NC750S(16-24)Braking brake pads sintered Front-R

Product Code：720CM55

Description 簡介：Braking brake pads CM55 sintered series Sintered metal brake pad for large range of conditions. It provides a stable brake performance and low wear rate. Top seller compound. Do not use for racing.

Price：HKD370

NC750S(16-24)Braking brake pads sintered Rear-R

Product Code：956CM56

Description 簡介：Braking brake pads CM56 sintered series Sintered metal brake pad for large range of conditions. It provides a stable brake performance and low wear rate. Top seller compound. Do not use for racing. Mescola

Price：HKD350

Integra700(12-13)Puig V-Tech line sport windshield OEM-90mm

Product Code：6283*

Description 簡介：WINDSHIELD V-TECH LINE SPORT FOR MOTORCYCLE HONDA INTEGRA 700 2012 Improve the sporty image of your motorcycle with the V-Tech Line Sport Puig screen. The screen belongs to the V-Tech Line design and has been developed in the wind tunnel to ensure its aerodynamic improvement, as well as its stability. In addition to its aerodynamic resistance, its angular shape in the central and lateral portions allows the redirecting and channelling of the wind and therefore minimizing turbulence. For some p

Price：HKD870

Integra700(12-13)Puig V-tech line touring windshield

Product Code：6035*

Description 簡介：WINDSHIELD V-TECH LINE TOURING FOR MOTORCYCLE HONDA INTEGRA 700 2013 Give your bike extra protection with the V-Tech Line Touring Windshield from Puig. Manufactured in 4mm high impact acrylic, it has been carefully designed, developed and tested in the wind tunnel to achieve maximum efficiency and strength in the face of inclement weather and gusty wind, guaranteeing a high degree of aerodynamic resistance. Its main feature is the angled shape in its central and lateral section that facilit

Price：HKD1130

Integra700(12-13)Puig levers 3.0

Description 簡介：LEVERS 3.0. FOR MOTORCYCLE HONDA INTEGRA 700 2013 Renew the levers of your motorcycle with the new PUIG 3.0 levers. It is the evolution from version 2.0. PUIG has emphasized on the ergonomic improvement of the piece and improved the look of the levers to bring a more modern and aggressive touch to the bike. The new shape of the levers allows for a perfect handle, fact that will guarantee greater grip and accessibility, making the riding experience of your motorcycle more unique. Regarding

Price：HKD

Integra700(12-14)Puig brake lever protector with mirror Pro

Product Code：21440*

Description 簡介：BRAKE LEVER PROTECTOR WITH REARVIEW MIRROR PRO FOR MOTORCYCLE HONDA INTEGRA 700 2012 Combines in an elegant and compact piece the protector for brake / clutch lever with mirror anchored to the end of the handlebar. This Puig product is an exercise in design and practicality as it manages to elegantly and compactly merge the lever protector with a mirror placed at the end of the handlebar. Made from a single block of aluminum with black anodizing, it has a modern and sporty look. The ano

Price：HKD1400

Integra700(12-13)Puig footpegs Racing

Product Code：6301* + adapter

Description 簡介：RACING FOOTPEGS FOR MOTORCYCLE HONDA INTEGRA 750 2020 The Puig racing footpegs are specially designed for R motorcycles and offer maximum grip to the rider and passenger. Its attractive sport design makes it the perfect complement for the most radical motorcycles, whose aesthetics receive an even more extreme touch. They measure 72 mm long and 27 mm wide and their weight is only 90 gr. Ergonomics is a key factor in its design, which has been designed to increase its free height to the ground,

Price：HKD360+adapte

Integra700(12-13)Puig footpegs Sport

Product Code：7318* + adapter

Description 簡介：SPORT FOOTPEGS FOR MOTORCYCLE HONDA INTEGRA 700 2012 The Puig sport footpegs are ideal for personalizing the style of naked bikes. Its attractive design and made of anodized aluminum makes them stand out on the motorcycle, whose image improves on sport looks. The sport footpegs measure 72 mm long and 27 mm wide and weigh only 90 gr. Its ergonomic design increases its free height to the ground, which allows a greater angle of inclination of the motorcycle. They are adjustable in inclination

Price：HKD430+adapte