改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

MT-10(16-21)Gilles Tooling AXB chain adjuster red

Product Code：AXB-RN45.r

Description 簡介：DESCRIPTION The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HKD1100

MT-10(16-21)Gilles Tooling GTA front axle protector red

Product Code：GTA-F-Y07.r

Description 簡介：DESCRIPTION features: impact body made of special plastic for perfect slipping characteristics (resistant against hits and abrasion) with center part made from aluminum, unique distinctive GILLES.TOOLING design (matching our other parts), reduction of impact damage around front axle. Scope of delivery: set of both sides for front axle.

Price：HKD880

MT-10(16-21)Gilles Tooling GTA rear axle protector red

Product Code：GTA-R-Y07.r

Description 簡介：DESCRIPTION features: impact body made of special plastic for perfect slipping characteristics (resistant against hits and abrasion) with center part made from aluminum, unique distinctive GILLES.TOOLING design (matching our other parts), reduction of impact damage around rear swing arm and axle. Scope of delivery: set of both sides for rear axle. Note: can not be used together with the chain adjuster TCA-RN22.

Price：HKD880

MT-10(16-21)Gilles Tooling GTA front axle protector black

Product Code：GTA-F-Y07.b

Description 簡介：DESCRIPTION features: impact body made of special plastic for perfect slipping characteristics (resistant against hits and abrasion) with center part made from aluminum, unique distinctive GILLES.TOOLING design (matching our other parts), reduction of impact damage around front axle. Scope of delivery: set of both sides for front axle.

Price：HKD880

MT-10(16-21)Gilles Tooling GTA rear axle protector black

Product Code：GTA-R-Y07.b

Description 簡介：DESCRIPTION features: impact body made of special plastic for perfect slipping characteristics (resistant against hits and abrasion) with center part made from aluminum, unique distinctive GILLES.TOOLING design (matching our other parts), reduction of impact damage around rear swing arm and axle. Scope of delivery: set of both sides for rear axle. Note: can not be used together with the chain adjuster TCA-RN22.

Price：HKD880

MT-10(16-21)Gilles Tooling IP crashpad-kit black

Product Code：IP-YA38-B

Description 簡介：DESCRIPTION Specification: patent, innovative crash pad perfect in form gilles.tooling design crash cap made of special material for best sliding characteristics progressive impact inlay bike specific, flexible frame mounting parts normally no need to cut the fairings Function: progressive impact inlay can prevent major damage reduced risk of frame and engine damages crash cap has high abrasion resistance easy mounting for wide range of models directly with specific mounting kit al

Price：HKD1880

MT-10(16-21)Gilles Tooling 2DGT adjustable handlebar risers

Product Code：2DGT-02-15.b

Description 簡介：DESCRIPTION Revolutionary 2DGT handlebar risers help you to find your perfect handlebar position. Move them up and down, forward and backward. 2DGT handlebar risers give you still unseen adjustability and styling. Details: suited for top yokes with 10.5mm holes for 28.6mm handlebars forward and backward adjustable in 3.6mm steps max. range forward and backward 25mm (depends on height adjustment and bike tank) up and down adjustable in 5mm steps with spacers (for MT10 10 mm lower, 5 mm lower or

Price：HKD1980

MT-10(16-21) Gilles Tooling handlebar Gold

Product Code：GTO-L-G

Description 簡介：Description: GT oversize handlebar low gold Our conical handlebar (claml diameter 28,6 mm, 755 mm wide, 86 mm high, 94 mm rearward bent in a 24 degree angle, 140 mm clamping width) scores with high rigidity and great look thanks to the high quality anodized surface.

Price：HKD880

MT-10(16-21) Gilles Tooling handlebar Black

Product Code：GTO-L-B

Description 簡介：Description : GT oversize handlebar low black Our conical handlebar (clamp diameter 28,6 mm, 755 mm wide, 86 mm high, 94 mm rearward bent in a 24 degree angle, 140 mm clamping width) scores with high rigidity and great look thanks to the high quality anodized surface.

Price：HKD880

MT-10(16-21)Gilles Tooling fuel cap

Product Code：FCAP-03-B

Description 簡介：DESCRIPTION The new GILLES fuel filler cap is an outstanding example of precise craftsmanship. The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company. Developed through experiences fro

Price：HKD1170

MT-10(16-21)Gilles Tooling safety axle nut ACM titan

Product Code：ACM-24-15

Description 簡介：DESCRIPTION safety axle nut ACM titan M24X1,5 made of titanium ti6alv4; a 20 gram (less than one ounce) lightweight axle nut in a shapely design, innovative pin-lock secure high locking characteristics; multifunctional application: safety for different bolted joints such as rear axles, pivot shafts, yokes etc.; no TÜV certificate required, plastic-pin of the pin-lock accommodate thread form and locks with friction, simple assembly with a regular hexagon nut.

Price：HKD890

MT-10(16-21)Gilles Tooling top yoke nutACMA aluminum

Product Code：ACMA-28-10.b

Description 簡介：DESCRIPTION Looking at your motorcycle you will find the GILLES.TOOLING ACMA to be the icing on the cake. Anodized in four different colors, it crests your steering central and catches every eye. GILLES.TOOLING ACMA is derived straight from our popular patented self-locking titanium ACM safety lock. In common with its ancestor, it has the easy to use pin-interlock system to prevent it from loosening. ACMA Is designed solely for use as top yoke nut. Do not use it on the rear axle or swing arm

Price：HKD480

MT-10(16-21)Gilles Tooling top yoke nutACMA aluminum

Product Code：ACMA-28-10.r

Description 簡介：DESCRIPTION Looking at your motorcycle you will find the GILLES.TOOLING ACMA to be the icing on the cake. Anodized in four different colors, it crests your steering central and catches every eye. GILLES.TOOLING ACMA is derived straight from our popular patented self-locking titanium ACM safety lock. In common with its ancestor, it has the easy to use pin-interlock system to prevent it from loosening. ACMA Is designed solely for use as top yoke nut. Do not use it on the rear axle or swing arm

Price：HKD480

MT-10(16-21)Gilles Tooling top yoke nutACMA aluminum

Product Code：ACMA-28-10.bl

Description 簡介：Looking at your motorcycle you will find the GILLES.TOOLING ACMA to be the icing on the cake. Anodized in four different colors, it crests your steering central and catches every eye. GILLES.TOOLING ACMA is derived straight from our popular patented self-locking titanium ACM safety lock. In common with its ancestor, it has the easy to use pin-interlock system to prevent it from loosening. ACMA Is designed solely for use as top yoke nut. Do not use it on the rear axle or swing arm axle.

Price：HKD480

MT-10(16-21)Gilles Tooling rear sprocket guard

Product Code：TG-02-KIT.gib

Description 簡介：DESCRIPTION This cover will be mounted under the swing arm and is homologated for race track use.

Price：HKD540

MT-10(16-21)Gilles Tooling sprocket cover

Product Code：SC-03.b

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. This is seen in all products of this group, also for this beautiful sprocket cover. The unique design matches with look of others from our parts and for the look of the bike as well.

Price：HKD1650