改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

NC750S(16-24)SW-Motech LED indicator set KOBRA handguards

Product Code：HPR.00.220.30000/B

Description 簡介：LED indicator set for KOBRA handguards LED blinkers, available separately, offer increased visibility in traffic and can be easily placed in the recesses of the handguards. A resistor set is required for retrofitting the blinkers with 10 or 20 watts to KOBRA LED blinkers with 1 watt. ECE test mark: E8 50R-001279 The LED indicators have an operating current of 12 volts and consume 1 watt per side The original indicators must be removed in order to be able to use the LED indicators Dependin

Price：HKD500

NC750S(16-24) SW-Motech Resistor set for LED indicators

Product Code：HPR.00.220.30700/B

Description 簡介：Resistor set for 1 watt LED indicators LED blinkers, available separately, offer increased visibility in traffic and can be easily placed in the recesses of the handguards. A resistor set is required for retrofitting the blinkers with 10 or 20 watts to KOBRA LED blinkers with 1 watt. For converting indicators with 10 and 20 watts to LED indicators for KOBRA handguards with only 1 watt Also suitable for other LED indicators with 1 watt Included in delivery 2 x Resistors (15 ohms/20 watts)

Price：HKD150

NC750S(16-24)SW-Motech BBSTORM handguard 2 point mounting

Product Code：HPR.00.220.10200/B

Description 簡介：BBSTORM Handguard kit Mounted on the handlebar internal thread and the bar end, the aluminum backbone is sturdy enough for your most demanding rides. The large BBSTORM handguard shells made of impact-resistant plastic have been specially developed for all-weather use and offer the best protection against cold and wind. In the event of a fall, damaged shells can be easily replaced. The BBSTORM handguards can be screwed onto the aluminum handlebars in just a few easy steps. Bike-specific mo

Price：HKD1600

NC750S(16-24)SW-Motech Handguard kit BBZ

Product Code：BBZ-001-01-BK

Description 簡介：Handguards kit BBZ Designed for strong and stormy wind conditions Maximum protection Made of flexible cloth fabric Suitable for almost all motorcycles Construction remains self-supporting in strong wind No fluttering in the wind Operation of the motorcycle is not affected Bends flexibly around the windscreen and fairing at full steering lock Mounting options: on the handlebar with handlebar end weights, for hollow handlebars or on existing aluminium backbones Included in delivery 2 x

Price：HKD1000

NC750S(16-24)SW-Motech Barkbuster handguard Kit STORM S1

Product Code：STM-001-00-BK

Description 簡介：Barkbusters STORM handguard kits STORM handguards are suitable for street machines, adventure bikes, naked bikes and scooters. The one-point mounting system allows a great deal of protection and simple mounting. The handguard kit includes the plastic shells, matching aluminum frames and the mounting material. STORM handguards offer an especially large protective surface and thus good protection against weather elements. Fits 22 mm handlebars One-point mount Particularly large protective su

Price：HKD1100

NC750S(16-24)Sunstar cain and sprocket kit

Product Code：K520RDG087

Description 簡介：SUNSTAR CHAIN KIT STEEL • The first KIT designed by the leading Japanese motorcycle makers supplier. • The KIT is made of Sunstar’s drive sprocket, rear sprocket and chain in their original size. Kit composed by : SS520RDG-114N 520 Road DualGuard Sealed Chain 3D417 Drive Sprocket 1-3485-43 Rear Sprocket Steel

Price：HKD1720

NC750S(16-24)Braking wave disc Front-R

Product Code：WF7106

Description 簡介：TYPE ONROAD DISK SERIES W-FIX DESCRIPTION Traditional WAVE® fix disk for both front and rear applications. Replacement of original OEM disk. PART NUMBER WF71XX front disk - WF75XX rear disk - TECHNICAL FEATURES AND BENEFITS more braking grip > highly reactive less weight > better handling high heat dissipation > stable power in all conditions HOW DOES IT WORK? Outer and inner diameter of the disk have a non-round design that enables better radial expansion of the rotor under extreme h

Price：HKD1640

NC750S(16-24)Braking brake disc wave fixed Rear-R

Product Code：WF7524

Description 簡介：TYPE ONROAD DISK SERIES W-FIX DESCRIPTION Traditional WAVE® fix disk for both front and rear applications. Replacement of original OEM disk. PART NUMBER WF71XX front disk - WF75XX rear disk - TECHNICAL FEATURES AND BENEFITS more braking grip > highly reactive less weight > better handling high heat dissipation > stable power in all conditions HOW DOES IT WORK? Outer and inner diameter of the disk have a non-round design that enables better radial expansion of the rotor under extreme h

Price：HKD1400

NC750S(16-24)Braking brake pads sintered Front-R

Product Code：720CM55

Description 簡介：Braking brake pads CM55 sintered series Sintered metal brake pad for large range of conditions. It provides a stable brake performance and low wear rate. Top seller compound. Do not use for racing.

Price：HKD370

NC750S(16-24)Braking brake pads sintered Rear-R

Product Code：956CM56

Description 簡介：Braking brake pads CM56 sintered series Sintered metal brake pad for large range of conditions. It provides a stable brake performance and low wear rate. Top seller compound. Do not use for racing. Mescola

Price：HKD350

Integra700(12-13) Wilbers Rear Shock Absorber

Product Code：640-1138-00

Description 簡介：The basic edition of the Wilbers Adjustline mono shock absorber comes along with the same technology as the more complex versions. The difference is that here we leave out the compression reservoir and thus the options for adjusting high- and low-speed compression. Nonetheless this shock absorber does not make any compromises concerning response behavior or durability. The radial piston, wet run, teflon guided self-aligning bearings and other features redefine the quality of a standard shock. Li

Price：HKD7680

Integra700(12-13)Puig V-Tech line sport windshield OEM-90mm

Product Code：6283*

Description 簡介：WINDSHIELD V-TECH LINE SPORT FOR MOTORCYCLE HONDA INTEGRA 700 2012 Improve the sporty image of your motorcycle with the V-Tech Line Sport Puig screen. The screen belongs to the V-Tech Line design and has been developed in the wind tunnel to ensure its aerodynamic improvement, as well as its stability. In addition to its aerodynamic resistance, its angular shape in the central and lateral portions allows the redirecting and channelling of the wind and therefore minimizing turbulence. For some p

Price：HKD870

Integra700(12-13)Puig V-tech line touring windshield

Product Code：6035*

Description 簡介：WINDSHIELD V-TECH LINE TOURING FOR MOTORCYCLE HONDA INTEGRA 700 2013 Give your bike extra protection with the V-Tech Line Touring Windshield from Puig. Manufactured in 4mm high impact acrylic, it has been carefully designed, developed and tested in the wind tunnel to achieve maximum efficiency and strength in the face of inclement weather and gusty wind, guaranteeing a high degree of aerodynamic resistance. Its main feature is the angled shape in its central and lateral section that facilit

Price：HKD1130

Integra700(12-13)Puig handguards

Product Code：9652*

Description 簡介：HANDGUARDS MAXISCOOTER FOR MOTORCYCLE HONDA INTEGRA 700 2013 At PUIG we continue working on the design, improvement and manufacture of screens that make riding our Maxiscooters a true experience of comfort and safety. Therefore, we have decided to create PUIG handguards for the most popular models in the market. The handguards are made of PMMA (Polymethylmethacrylate), hard material and with high resistance to possible scratches and you can find them in the same colors as PUIG screens for Maxi

Price：HKD1470

Integra700(12-13)Puig rear fenders

Product Code：6038*

Description 簡介：REAR FENDERS FOR MOTORCYCLE HONDA INTEGRA 700 2013 Add extra protection to your bike with the new range of Puig rear fenders. Manufactured in ABS material, highly resistant to impacts and with great aerodynamic capacity, it will be the ideal complement to cover one of the empty parts of the motorcycle. It will also protect you from possible splashes or objects impacts during the ride. In addition to the protection, Puig has placed special emphasis on the design of the piece, achieving an ava

Price：HKD1310-1530

Integra700(12-13)Puig front fender extension

Product Code：6302N

Description 簡介：FRONT FENDER EXTENSION FOR MOTORCYCLE HONDA INTEGRA 750 2012 Give more protection to your motorcycle with the front fender extension from PUIG. The extension is made of ABS material which is highly resistant to impacts, it will be the ideal protection to prevent debris coming from the front wheel and impacting the body of your motorcycle or directly against you. The extension comes in black finish to match the look of your motorcycle. PUIG, has a specific extesion for the most popular motorcyc

Price：HKD380