Description 簡介:DESCRIPTION
Our style parts combine great appearance and style with utility. Alos this racing covers for the mounting points mirrors and license plate bracket. The utility is always an important detail: racing covers protect open mounting points against dirt and moisture.
Description 簡介:DESCRIPTION
The gear shaft stands too far out of the gear box, it bends elastically when shifting hard or quick which is the reason for imprecise gear shifting
Our Shiftholder helps to eliminate gear shift problems, it stabilizes the gear shaft and
eliminates vague shifting. A needle bearing is used, it comes in hard anodized titanium color. The original screws will be used for mounting. A sprocket cover is inside the scope of delivery too.
Description 簡介:DESCRIPTION
Our conical handlebar (clamp diameter 28,6 mm, 755 mm wide, 86 mm high, 94 mm rearward bent in a 24 degree angle, 140 mm clamping width, tube diameter 14,2mm) scores with high rigidity and great look thanks to the high quality anodized surface.
Note Kawasaki Z900 RS / Café: fits only the RS model.
Description 簡介:DESCRIPTION
GT oversize handlebar low gold
Our conical handlebar (claml diameter 28,6 mm, 755 mm wide, 86 mm high, 94 mm rearward bent in a 24 degree angle, 140 mm clamping width, tube diameter 14,2mm) scores with high rigidity and great look thanks to the high quality anodized surface.
Description 簡介:DESCRIPTION
The new GILLES fuel filler cap is an outstanding example of precise craftsmanship.
The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company.
Developed through experiences fro
Description 簡介:DESCRIPTION
Features: black anodized Very lightweight construction (ca. 670 gram) Engraved markings for easy justification to the fork Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Length of the tube is 255,5mm Fixed angle of 6 degree is the perfect compromise for sportive and street use Note: for all GSX-R 600, 7
Description 簡介:DESCRIPTION
Features:- black anodized- Very lightweight construction (ca. 670 gram)- Engraved markings for easy justification to the fork- Separated bolting for clamp and tube to avoid damages to the fork in case of crash- Bolting of the tube is at the outer position for easier change with standard tools- Length of the tube is 255,5mm- Fixed angle of 6 degree is the perfect compromise for sportive and street use Besides others, Ya
Description 簡介:DESCRIPTION
Features: black anodized Very lightweight construction (ca. 670 gram) Engraved markings for easy justification to the fork Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Length of the tube is 255,5mm Fixed angle of 6 degree is the perfect compromise for sportive and street use Note: for all GSX-R 600, 7
Description 簡介:Description
Our conical handlebar (claml diameter 28,6 mm, 755 mm wide, 86 mm high, 94 mm rearward bent in a 24 degree angle, 140 mm clamping width) scores with high rigidity and great look thanks to the high quality anodized surface.
Description 簡介:Description
Our conical handlebar (clamp diameter 28,6 mm, 755 mm wide, 86 mm high, 94 mm rearward bent in a 24 degree angle, 140 mm clamping width) scores with high rigidity and great look thanks to the high quality anodized surface.
Description 簡介:Description:
handlebar GP-LIGHT 2 500 RACE
Black anodized
Very lightweight construction
Separated bolting for clamp and tube to avoid damages to the fork in case of crash
Bolting of the tube is at the outer position for easier change with standard tools
Fixed angle of 6 degree is the perfect compromise for sportive and street use
Description 簡介:DESCRIPTION
Our triple trees are used in various high racing classes. The feedback and know-how from flows directly into the products, benefit from it for your own motorcycle as well.
Each component is made of aluminum, which ensures minimum weight with maximum performance and stability.
An offset of zero is used for this top yoke which means original geometry. This set can therefore be used directly with the standard fork.
This is a pure racing product without street legalization.
Description 簡介:DESCRIPTION
Black anodized
Very lightweight construction
Separated bolting for clamp and tube to avoid damages to the fork in case of crash
Bolting of the tube is at the outer position for easier change with standard tools
Fixed angle of 6 degree is the perfect compromise for sportive and street use
For Honda CBR 1000RR/R Fireblade (Type SC82) the additional mounting kit GPL2-ABK-H01 is needed.
Description 簡介:DESCRIPTION
Features: black anodized Very lightweight construction (ca. 670 gram) Engraved markings for easy justification to the fork Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Length of the tube is 255,5mm Fixed angle of 6 degree is the perfect compromise for sportive and street use Note: for all GSX-R 600, 7
Description 簡介:DESCRIPTION
The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised.
The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure
Description 簡介:DESCRIPTION
Black anodized
Very lightweight construction
Separated bolting for clamp and tube to avoid damages to the fork in case of crash
Bolting of the tube is at the outer position for easier change with standard tools
Fixed angle of 6 degree is the perfect compromise for sportive and street use
For Honda CBR 1000RR/R Fireblade (Type SC82) the additional mounting kit GPL2-ABK-H01 is needed.