翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

YZF-R7(22-25)Gilles Tooling handshield clutch side

Product Code：KHP2-01-BD

Description 簡介：DESCRIPTION The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HKD1270

YZF-R7(22-25)Gilles Tooling IP crashpad-kit black

Product Code：IP-YA36-B

Description 簡介：DESCRIPTION Specification: patent, innovative crash pad perfect in form gilles.tooling design crash cap made of special material for best sliding characteristics progressive impact inlay bike specific, flexible frame mounting parts normally no need to cut the fairings Function: progressive impact inlay can prevent major damage reduced risk of frame and engine damages crash cap has high abrasion resistance easy mounting for wide range of models directly with specific mounting kit al

Price：HKD1580

YZF-R7(22-25)Gilles Tooling GTA rear crashpad black

Product Code：GTA-R-Y02.b

Description 簡介：DESCRIPTION impact body made of special plastic for perfect slipping characteristics (resistant against hits and abrasion) with center part made of aluminum, unique distinctive GILLES.TOOLING design (matching our other parts), long guiding inside to increase stability, reduction of impact damage around rear swing arm and axle. Scope of delivery: set of both sides for rear axle.

Price：HKD770

YZF-R7(22-25)Gilles Tooling handlebar GP-LIGHT 4 500 black

Product Code：GPL4-500-B

Description 簡介：Description KEY FACTS - Fixed angle of 6 degree is the perfect compromise for sportive and street use - Lightweight Construction - Replaceable Steering Tubes - Plug-and-Play (DEPEDNING ON MODEL) - Compatibility = Compatible with BHP2 and LG - Extra Feature = Clamp with Groove - Fork Diameter = 50mm - Material = High-Strength Aluminum - Weight = 600g (Set) - Homologation = Part Approval Certificate - Spare Parts Supply = We offer spare parts supply for this product LIGHTWEIGHT CONS

Price：HKD2750

YZF-R7(22-25)Gilles Tooling handlebar GP-LIGHT 2 500 black

Product Code：GPL2-500.b

Description 簡介：DESCRIPTION Features: black anodized Very lightweight construction (ca. 670 gram) Engraved markings for easy justification to the fork Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Length of the tube is 255,5mm Fixed angle of 6 degree is the perfect compromise for sportive and street use Note: for all GSX-R 600, 7

Price：HKD1980

YZF-R7(22-25)Gilles Tooling MOON barend-mirror round

Product Code：M04-01-BD

Description 簡介：Description KEY FACTS - SCOPE OF DELIVERY: 1 PIECE, MIRROR CAN BE USED LEFT AND RIGHT - ELEGANT BAR END MIRROR - UNIVERSAL CLAMPING - PLUG-AND-PLAY - STEPLESS DUAL ADJUSTMENT - MATERIAL = HIGH-STRENGTH ALUMINUM - WEIGHT = 190g - WIDTH = 6mm - OPTIONAL: 7 DIFFERENT COLORINGS AVAILABLE(SEE BELOW) - HOMOLOGATION = E-MARK - SPARE PARTS SUPPLY = WE OFFER SPARE PARTS SUPPLY FOR THIS PRODUCT BAR END MIRROR This variant allows for easy and space-saving installation directly at the ba

Price：HKD1580

YZF-R7(22-25)Gilles Tooling STRATOS barend-mirror

Product Code：M03-01-BD

Description 簡介：Description KEY FACTS - SCOPE OF DELIVERY: 1 PIECE, MIRROR CAN BE USED LEFT AND RIGHT - ELEGANT BAR END MIRROR - UNIVERSAL CLAMPING - PLUG-AND-PLAY - STEPLESS DUAL ADJUSTMENT - MATERIAL = HIGH-STRENGTH ALUMINUM - WEIGHT = 190g - WIDTH = 6mm - OPTIONAL: 7 DIFFERENT COLORINGS AVAILABLE(SEE BELOW) - HOMOLOGATION = E-MARK - SPARE PARTS SUPPLY = WE OFFER SPARE PARTS SUPPLY FOR THIS PRODUCT BAR END MIRROR This variant allows for easy and space-saving installation directly at the bar

Price：HKD1580/each

YZF-R7(22-)Gilles Tooling GYT-R7RWC-S0 rear wheel attachment

Product Code：RWK-02-B

Description 簡介：DESCRIPTION During changing the wheel the rear brake caliper and the wheel bushing stay in place and a guide rail at the inside allows easy moving of the wheel. Also included is a set of axle protectors. Form and function directly inspired by racing teams: impact body made of aluminum, unique distinctive design (matching our other parts), reduction of impact damage around rear swing arm and axle. The conical shaped milled aluminum body helps pulling the axle. Ideal use in combination with

Price：HKD4400

YZF-R7(22-25)Gilles Tooling rear sprocket guard

Product Code：TG-05-KIT-BD

Description 簡介：DESCRIPTION This cover will be mounted under the swing arm and is homologated for race track use. Can not be used in combination with our PSA2 spools.

Price：HKD540

YZF-R7(22-25)Gilles Tooling passenger footpeg cover

Product Code：PPC-11-KIT-B

Description 簡介：DESCRIPTION This kit contains the following components: 2x cover for holders of the passenger pegs. Thus, after disassembling the original passenger pegs, the corresponding open mounting points can be concealed cleanly and visually attractive. The original screws will be used for mounting. IN ADDITION, the covers for the pillion seat holders also work as an attachment for lashing straps. Thus, the motorcycle can be properly and securely attached during transport.

Price：HKD770

YZF-R7(22-25)Gilles Tooling race cover kit

Product Code：RCK-14-B

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. Alos this racing covers for the mounting points mirrors and license plate bracket. The utility is always an important detail: racing covers protect open mounting points against dirt and moisture.

Price：HKD1650

YZF-R7(22-25)Gilles Tooling shiftholder

Product Code：SHIHO-RM39-KIT-T

Description 簡介：DESCRIPTION The gear shaft stands too far out of the gear box, it bends elastically when shifting hard or quick which is the reason for imprecise gear shifting Our Shiftholder helps to eliminate gear shift problems, it stabilizes the gear shaft and eliminates vague shifting. A needle bearing is used, it comes in hard anodized titanium color. The original screws will be used for mounting. A sprocket cover is inside the scope of delivery too.

Price：HKD950

YZF-R7(22-25)Rizoma Stealth mirror

Product Code：BSS020*

Description 簡介：Technical information - Warning: The Rizoma Stealth mirror is not certified compliant. Stealth's design, with its wing-like shape and 25° angle relative to the ground, give it a linear look, ensure it generates downforce, in turn improving the bike's grip and handling performance, especially at high speed. Downforce pressure is around 4 kg at 300 km/h. The ergonomics has been optimized as well: when the rider takes a sporty riding position, the mirrors are aligned with the rider's eye leve

Price：HKD

YZF-R7(22-25)Sunstar ergal sprocket with golden chain kit

Product Code：KS4G613

Description 簡介：Please note that this picture may differ from the actual product application Chain kit composed by 421-16 Drive sprocket RY-114-42 Ergal rear sprocket SS525SKC-108GD Golden chain

Price：HKD2400

YZF-R7(22-25)Etching Factory radiator guard Silver

Product Code：RGY-YZFR7-00

Description 簡介：日本 Etching Factory 冨士精密工業株式会社出品 ,水箱保護網 . 設計及品質經日本鈴鹿 8 小時電單車耐力賽經驗應用在産品上. 不鏽鋼（SUS304 0.8t）材質, 厚度, 硬度與及孔徑密度等數据都在賽道中得到驗証. 特别是透氣孔徑疏密分佈, 水箱網兩側孔徑較大, 中間較密 , 達到冷卻效率及保護功能得到平衡. 産品更應用於 Moto GP 賽事中, 品質得到廣泛認受. 日本製造

Price：HKD1150

YZF-R7(22-25)Etching Factory radiator guard Black

Product Code：RGY-YZFR7-00-SB

Description 簡介：日本 Etching Factory 冨士精密工業株式会社出品 ,水箱保護網 . 設計及品質經日本鈴鹿 8 小時電單車耐力賽經驗應用在産品上. 不鏽鋼（SUS304 0.8t）材質, 厚度, 硬度與及孔徑密度等數据都在賽道中得到驗証. 特别是透氣孔徑疏密分佈, 水箱網兩側孔徑較大, 中間較密 , 達到冷卻效率及保護功能得到平衡. 産品更應用於 Moto GP 賽事中, 品質得到廣泛認受. 日本製造

Price：HKD1340